Paper Pulp Screening Machine Fine inflow Pressure Screen
Overview of inflow pressure screen
Inflow pressure screen adopts the up-flow structure design of pulp at the bottom, heavy slag discharge at the bottom, and light slag discharge at the top, which effectively solves the above problems. Light impurities and air in the pulp naturally rise to the top slag discharge port for discharge, and heavy impurities can settle to the bottom for discharge as soon as they enter the body.
It is used for pre-screening of refined pulp and paper machine in pulping and papermaking system.
Main feature
1. High screening efficiency: Because the slurry enters the sieve along the tangent line at a higher pressure, the fiber and coarse impurities have been separated before the slurry enters the sieve drum under the action of centrifugal force. Qualified fibers quickly pass through the sieve drum depending on the pressure difference between the inlet and outlet of the pulp.
2. Long service life of the screen drum: After the pulp enters the pressure screen, the heavy impurities of the pulp have been separated by the centrifugal effect, so the impact and wear of the impurities on the rotor and the screen drum are reduced. Extend the service life of the screen drum.
3. No clogging when sieving the pulp: the pulp is uniformly sieved from top to bottom without thickening, the impurities are far away from the sieve drum, and the sieve drum is not easy to be blocked.
4. It can replace low-pulse sieve: this machine has low pulse intensity of good pulp, so it will not be disturbed directly on the Internet.
5. The pulp quality is good. The sieve drum is made of stainless steel and the finer sieve slits greatly increase the removal rate of harmful impurities in the good pulp.
6. Low maintenance cost: The spindle adopts advanced mechanical sealing system, which is not easy to be damaged.
Technical Data
| Model |
AT0.6 |
AT0.9 |
AT1.2 |
AT1.5 |
AT2 |
AT2.5 |
AT3.5 |
AT4.5 |
AT6 |
| Inlet consistency(%) |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
0.5-1.2 |
| Inlet pressure(MPa) |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
0.1-0.3 |
| Motor Power(KW) |
15-22 |
18.5-30 |
22-37 |
30-45 |
37-55 |
37-75 |
45-110 |
55-132 |
75-160 |
| Capacity(t/24h) |
20-30 |
25-60 |
30-80 |
40-120 |
80-210 |
100-230 |
140-280 |
180-350 |
230-500 |
The main section
| Rated pressure MPA |
Design pressure 0.2-0.6 |
Max operating pressure 0.6 |
| Rotor |
Type |
no winding |
| Material |
mainbody 304 |
| Rotor blades |
316 |
| Screen Basket |
Type |
Corrugated cone |
| Slot Size |
Customized |
| Thickness |
Customized |
| Slot rate |
Customized |
| chromium coating |
150μm |
| Sealing device |
Type |
Double mechanical seal |
| Cooling water flow |
More than 2l/min |
|
Cooling water pressure |
More than 0.3mpa |
| Cooling water requirement |
Filter clean water through 120 mesh |
| Drive installation |
Type |
Triangle belt |
| Equipment List |
| Equipment body |
1set |
| Transmission Parts |
1set |
| Rotor |
1 PC |
| Motor |
1 PC |
| Screen basket |
1 PC |
| Drive |
1set(Including motor slide rail, belt, pulley,) |
| Safety hood |
1set |
| Equipment base |
1set |
| Foundation bolt |
1set |
| Sealed water flow detection alarm device |
1set |
| Automatic oiling device |
1set |
| Diaphragm-seal pressure gauge |
2PC |
Other Hot Sale pulp equipment
Package & Shipping
Packaging
products will packaged according to their shapes, weight, transport distance and transport modes.
Large machines will be packaged in sections.every part export machinery will be in standard export package seaworthy wooden case waterproof film, straw rope, carton box etc
Shipping
sea transportation is from Qingdao seaports or other china main ports.
the delivery time is decided by machine types.But we also try to make it follows your needs.
){kind=link}