Paper making machine pulping machine low density cleaner
Please read down
The low-concentration cleaner is a kind of pulp purification and slag removal equipment in the paper industry. The shape is a cone with a cone angle of about 8 to 13 degrees, made of stainless steel, hard rubber, or cast iron lined with a polyethylene-based plastic layer. The inner wall is smooth and clean, wear-resistant, pressure-resistant, corrosion-resistant, and will not deform at a temperature of 40 to 60 ºC. Use vortex motion to remove heavier impurities. The slag removal efficiency is higher than that of the vortex cleaner, which can significantly reduce the dustiness of the pulp. And it can be bundled or paralleled in rows, and the tailings can be re-selected in sections to reduce the loss of pulp slag removal.
Characteristic
1.Mainly used for removing heavy impurityin the pulp like gravel,scrap iron,dust and large ink particles.
2.Divided design,the cleaner can be divided into 3-4 parts,which make it easier for disassembly,assembly and replace.
3.Different deslagging ways:open and closed type impurity discharge to meet different working enviroment.
4..The bottom of cone adopts wear-resistant ceramics.It ensures the stable deslagging and long service life.
| Product name |
Low density cleaner |
| Model |
AT-400 |
| Capacity |
480 |
| Single rated throughput(L/min) |
400 |
| Inlet concentration(%) |
0.5-1 |
| Inlet pressure(Mpa) |
0.2-0.3 |
){kind=link}