Warranty: | 1 Year |
---|---|
Type: | Kraft Paper |
Sheet Former Type: | Cylinder Mould |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
1.Cylinder section:
Φ1500mm×2650mm stainless steel cylinder mould 4 sets, Φ480mm×2650mm couch roll 4sets,Φ500mm×2850mm reverse roll 1set, rubber shore hardness HSD85±2.
2.Press section:
one pre-press and three main pressure constitute
Pre-press roll φ400×2850mm 2sets, The cast iron roll body, The surface of the rubber, Thickness of rubber is 20mm, hardness is 90°±2, Bearing No.113622.
Press upper roll: φ850×2850mm 3 sets, Roller body as the natural granite, bearing No.113628; with scraper blade 3sets.
Press low roll: φ800×2850mm 3sets, The cast iron roll body, The surface of the rubber, Thickness of rubber is 20mm, hardness is 90°±2, Bearing No.113628.
3.Dryer part
It is consisted of 28 sets of φ1500mm dryers,drive arrangement is four groups , the bearing of dryer isrolling bearing, exposed drive.
Dryer can: φ1500mm x 2850mm,material is HT200, hardness is HB190-220, working pressure is 0.3Mpa;bearing type is 113536. The dryer can ,Grease lubrication, or rotating steam joint and siphon.
Main technical parameters
Raw material | waste paper |
Output paper | fluting paper,kraft paper |
Output paper weight | 90-150g/m2 |
net paper width | 2400mm |
Capacity | 60T/D |
Width of cylinder mould | 2650 mm |
Rail gauge | 3300 mm |
Working speed | 90-120m/min |
Drive way:AC | AC inverter speed, section drive; |
Our company was founded in 1985,according to the modern enterprise mechanism into a large-scale standardized joint-stock enterprises,with 278 workers,including 23 engineers and technicians,15 senior engineers.In general,Aotian is in the leading place of paper making industry in China.
Our factory can produce mechanical pulping equipment,chemical pulping equipment,paper scrap deinking equipment, pulping and paer making sewage treatment equipment,paper-plastic of composite paper separating equipment,etc. We will provide whole services according to our clients' demand, like technical design, equipment priduction, installation and test instruction and so on.We will meet and exceed your expectations.Please contact our custom services for details.
Our Service
Suppliers with verified business licenses